News

The method avoid steel pipe from being damaged during transportation?

Posted by wilson

2022-09-09

1. The length of spiral steel pipe cannot be tied. 2. If there is a thread buckle on both ends of the spiral steel pipe, it should be protected by a thread protector. Apply lubricant or rust preventi...

04 Sep

News

Is carbon steel better than stainless steel?

Posted by wilson

2022-09-04

Steel is a term that refers to the entire family of metal alloys. There are many grades of steel, but most of them fall into two broad categories - carbon steel and stainless steel. In both of t...

04 Sep

News

The function of chemical carbon &Forged in steel fittings make stronger?

Posted by wilson

2022-09-04

While the addition of carbon can provide greater toughness and yield strength, the carbon content of the steel itself is not always equal to the strength of the alloy. Carbon alloys will make stee...

03 Sep

News

Large Diameter Butt Weld Fitting Mitered Elbow

Posted by wilson

2022-09-03

The large diameter butt weld elbow is a steel hot pressed or forged elbow, which is connected in the form of a straight butt weld between the elbow and the steel pipe. To change the angle and directio...

02 Sep

News

What is Lined Pipe?

Posted by wilson

2022-09-02

The development of steel pipe In the 1940s, due to the limitations of metallurgical technology and process, C, Mn and Si were added to the steel for pipes to increase the strength of steel. Line P...

31 Aug

News

A420 WPL6 for low-temperature steel piping Pressure-bearing parts

Posted by wilson

2022-08-31

Grade：ASTM A420 WPL6 Product name: American Standard seamless structural fittings with low temperature forged carbon steel Executive Standard: ASME SA-420/SA-420M ASTM A-420/A-420M 2. ASTM A4...

31 Aug

News

Five kinds of flange processing process steps

Posted by wilson

2022-08-31

1, casting flange processing process. The selected raw materials steel into the medium frequency electric furnace melting, so that the steel temperature of 1600-1700 ℃; the metal mold preheated to ...

31 Aug

News

DIN 2576 Slip On Flange description

Posted by wilson

2022-08-31

DIN 2576 pn10 carbon steel flange specs, Din 2576 flange material buy Din 2576 pn10 flat flange with factory price. What is DIN 2576 PN10 flange? Because of this, there are differ...

31 Aug

News

GOST 17376 Butt Weld Tees: Seamless and Welded, Carbon Steel and Low Alloy Steel Alloy Steel Bw

Posted by wilson

2022-08-31

Стальные тройники ГОСТ 17376-2001 применяются для труб различного назначения, в том числе для систем управления, при PN до 160 МПа и температурах от -70 °C до +450 °C. Обзор: Диаметр тройника 1, D 2...

31 Aug

News

ГОСТ17378-01 BW Reducer

Posted by wilson

2022-08-31

При строительстве трубопроводов неизбежно возникнут проблемы, связанные с изменением маршрута магистрали и диаметра трубы. Эти задачи решаются с помощью изготовленной трубопроводной арматуры (элементо...

The method avoid steel pipe from being damaged during transportation?

Is carbon steel better than stainless steel?

The function of chemical carbon &Forged in steel fittings make stronger?

Large Diameter Butt Weld Fitting Mitered Elbow

What is Lined Pipe?

A420 WPL6 for low-temperature steel piping Pressure-bearing parts

Five kinds of flange processing process steps

DIN 2576 Slip On Flange description

GOST 17376 Butt Weld Tees: Seamless and Welded, Carbon Steel and Low Alloy Steel Alloy Steel Bw

ГОСТ17378-01 BW Reducer

Contact us

Wechat

Follow us

Yearly Archives: 2022

Contact us

Wechat

Follow us