90° Short Radius 1D Elbow introduction
ANSI/ASME B16.9 Short Radius 90° Elbow is inserted between two lengths of pipe (or pipe) to allow for a change of direction at the 90° edge. A short radius 90° elbow is most commonly attached to plast...
What’s the different of carbon steel pipe and stainless steel pipe?
Stainless steel tubing and carbon steel tubing are both good choices for a variety of applications, so knowing which is right can be difficult. By learning the basics of what steel tubing is and how i...
What’s the Steel BW SW Fittings in the Pipeline
A pipe fitting is defined as a part used in a piping system, for changing direction, branching or for change of pipe diameter, and which is mechanically joined to the system. There are many different ...
The method avoid steel pipe from being damaged during transportation?
1. The length of spiral steel pipe cannot be tied.
2. If there is a thread buckle on both ends of the spiral steel pipe, it should be protected by a thread protector. Apply lubricant or rust preventi...
Is carbon steel better than stainless steel?
Steel is a term that refers to the entire family of metal alloys.
There are many grades of steel, but most of them fall into two broad categories - carbon steel and stainless steel.
In both of t...
The function of chemical carbon &Forged in steel fittings make stronger?
While the addition of carbon can provide greater toughness and yield strength,
the carbon content of the steel itself is not always equal to the strength of the alloy. Carbon alloys will make stee...
