A234 WPB Carbon Steel Pipe Fittings
| Name: | A234 WPB Carbon Steel Pipe Fittings |
| Specification: | ASTM A234 |
| Size: | 1/4″ to 120″ |
| Rating: | SCH10 To SCHXXS |
| Steel Grade: | A234 WPB |
| MOQ: | 100 KGS |
| Packing: | Standard seawory/airworthy packing |
| End: | Plain ends or bevelled ends |
| Delivery term: | FOB, CIF, CNF, EXW |
| Payment term: | TT or L/C at sight |
| Loading Port: | XINGANG |
| Deliver mode: | By sea, By air, By land |
Description
ASME B16.9 ASTM A403 WP304 Equal Tee
1. Size: 3 1/2 inch (DN90)
2. Material: 304
3. High quality, competitive price.
Base on excellente quality, satisfactory service and reasonable prcie, wilson pipeline s products have exported to USA, Russia, Korea, Brazil, Chile, Peru and MId East, etc.
China Equal Tee Manufacturer wilson pipeline supplies ASME B16.9 ASTM A403 WP304 Equal Tee, DN90, Sch40S.
Composition ranges for 304 grade stainless steel
|
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
|
|
304 |
min. max. |
– 0.08 |
– 2.0 |
– 0.75 |
– 0.045 |
– 0.030 |
18.0 20.0 |
– |
8.0 10.5 |
– 0.10 |
|
304L |
min. max. |
– 0.030 |
– 2.0 |
– 0.75 |
– 0.045 |
– 0.030 |
18.0 20.0 |
– |
8.0 12.0 |
– 0.10 |
|
304H |
min. max. |
0.04 0.10 |
– 2.0 |
– 0.75 |
-0.045 |
– 0.030 |
18.0 20.0 |
– |
8.0 10.5 |
– |
Mechanical properties of 304 grade stainless steel
|
Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
|
|
Rockwell B (HR B) max |
Brinell (HB) max |
||||
|
304 |
515 |
205 |
40 |
92 |
201 |
|
304L |
485 |
170 |
40 |
92 |
201 |
|
304H |
515 |
205 |
40 |
92 |
201 |
|
304H also has a requirement for a grain size of ASTM No 7 or coarser. |
|||||
Physical properties of 304 grade stainless steel in the annealed condition
|
Grade |
Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Coefficient of Thermal Expansion (μm/m/°C) |
Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Electrical Resistivity (nΩ.m) |
|||
|
0-100°C |
0-315°C |
0-538°C |
at 100°C |
at 500°C |
|||||
|
304/L/H |
8000 |
193 |
17.2 |
17.8 |
18.4 |
16.2 |
21.5 |
500 |
720 |
Grade specifications for 304 grade stainless steel
|
Grade |
UNS No |
Old British |
Euronorm |
Swedish SS |
Japanese JIS |
||
|
BS |
En |
No |
Name |
||||
|
304 |
S30400 |
304S31 |
58E |
1.4301 |
X5CrNi18-10 |
2332 |
SUS 304 |
|
304L |
S30403 |
304S11 |
– |
1.4306 |
X2CrNi19-11 |
2352 |
SUS 304L |
|
304H |
S30409 |
304S51 |
– |
1.4948 |
X6CrNi18-11 |
– |
– |
|
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted. |
|||||||
| Type | ASME B16.9 ASTM A403 WP304 Equal Tee |
| Size | Seamless 1/2″ To 48″ Welded To 72″ |
| Wall thickness | Sch5S-Sch160, XS,XXS |
| Standards | ANSI, ASTM,DIN, JIS, BS, ISO, GB, SH, AND HG etc |
| Material | Stainless Steel: ASTM A403 WP304, 304L, 310, 316, 316L, etc
Carbon Steel: ASTM A234 WPB, WPC ASTM A105 WPHY 42, etc Alloy Steel: ASTM A234 WP1, etc Low Temperature: ASTM A420 WPL 1, etc Duplex and super duplex steel: ASTM A815 UNS S31803/S32205/S32750/S32760/S32550 |
| Surface treatment | Sand Rolling, Sand Blasting ,Acid Cleaning. |
| Packing | wooden case, pallet or as customers’ requirement |
| Applications | Petroleum,chemical,power,gas,metallurgy, shipbuilding, construction, etc |
Dimensions Butt Welded Reducing Tees ASME B16.9 NPS 1/2 to 48
Other Diameters
1/2 – 4
5 – 16
18 – 26
28 – 32
34 – 38
40 – 42
44 – 48
| NPS | O.D. D |
O.D. D1 |
Center to End C |
Center to End M |
| 3/4 – 1/2 | 26.7 | 21.3 | 29 | 29 |
| 1 – 1/2 | 33.4 | 21.3 | 38 | 38 |
| 1 – 3/4 | 33.4 | 26.7 | 38 | 38 |
| 1.1/4 – 1/2 | 42.2 | 21.3 | 48 | 48 |
| 1.1/4 – 3/4 | 42.2 | 26.7 | 48 | 48 |
| 1.1/4 – 1 | 42.2 | 33.4 | 48 | 48 |
| 1.1/2 – 1/2 | 48.3 | 21.3 | 57 | 57 |
| 1.1/2 – 3/4 | 48.3 | 26.7 | 57 | 57 |
| 1.1/2 – 1 | 48.3 | 33.4 | 57 | 57 |
| 1.1/2 – 1.1/4 | 48.3 | 42.2 | 57 | 57 |
| 2 – 3/4 | 60.3 | 26.7 | 64 | 44 |
| 2 – 1 | 60.3 | 33.4 | 64 | 51 |
| 2 – 1.1/4 | 60.3 | 42.2 | 64 | 57 |
| 2 – 1.1/2 | 60.3 | 48.3 | 64 | 60 |
| 2.1/2 – 1 | 73 | 33.4 | 76 | 57 |
| 2.1/2 – 1.1/4 | 73 | 42.2 | 76 | 64 |
| 2.1/2 – 1.1/2 | 73 | 48.3 | 76 | 67 |
| 2.1/2 – 2 | 73 | 60.3 | 76 | 70 |
| 3 – 1.1/4 | 88.9 | 42.2 | 86 | 70 |
| 3 – 1.1/2 | 88.9 | 48.3 | 86 | 73 |
| 3 – 2 | 88.9 | 60.3 | 86 | 76 |
| 3 – 2.1/2 | 88.9 | 73 | 86 | 83 |
| 3.1/2 – 1.1/2 | 101.6 | 48.3 | 95 | 79 |
| 3.1/2 – 2 | 101.6 | 60.3 | 95 | 83 |
| 3.1/2 – 2.1/2 | 101.6 | 73 | 95 | 89 |
| 3.1/2 – 3 | 101.6 | 88.9 | 95 | 92 |
| 4 – 1.1/2 | 114.3 | 48.3 | 105 | 86 |
| 4 – 2 | 114.3 | 60.3 | 105 | 89 |
| 4 – 2.1/2 | 114.3 | 73 | 105 | 95 |
| 4 – 3 | 114.3 | 88.9 | 105 | 98 |
| 4 – 3.1/2 | 114.3 | 101.6 | 105 | 102 |
Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer.
WPB A234 Dimensional Tolerances Reducing Tees ASME B16.9
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Dia at Bevel (D) |
+1.6 -0.8 |
1.6 | 1.6 | +2.4 -1.6 |
+4 -3.2 |
+6.4 -4.8 |
+6.4 -4.8 |
+6.4 -4.8 |
| Inside Dia at End | 0.8 | 1.6 | 1.6 | 1.6 | 3.2 | 4.8 | +6.4 -4.8 |
+6.4 -4.8 |
| Center to End (C / M) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 5 |
| Wall Thk (t) | Not less than 87.5% of Nominal Wall Thickness | |||||||
Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.
Note..
MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with Schedule 40S pipe, as defined in ASME B36.19. The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 – NPS 24. Except with regard to the outside diameter at the bevel.
Shipping & Delivery
Free Delivery
Orders from 70,00 Euro will be shipped free of charge within Germany and to Austria with GLS! Up to 69,99 Euro order volume we charge only 3,90 Euro with GLS. For shipment with DHL GoGreen within Germany we charge only 5,90 Euro up to 69,99 Euro order volume or 2,00 Euro for orders from 70,00 Euro.
Delivery Time: Ready for Shipping within 24h
We try hard to make as much orders as possible ready for shipping within 24 hours (after receiption of payment), because we generally offer only items in our online shop which we have currently on stock. The independent official seal for excellence in shipment always shows you, have fast we are currently working (make your order ready for pick-up by our logistics partner).
Delivery areas:
We deliver to the following countries:
Germany, Austria, Switzerland and Belgium, Bulgaria, Denmark, Estonia, Finland, France, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Liechtenstein, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Russia, Sweden, Switzerland, Slovakia, Slovenia, Spain, Czech Republic, Hungary, USA. Please find information about delivery costs below. We usually do, but currently do NOT ship to: UK and Norway. Please visit this site frequently for updates or contact our customer service.
Returns
If a product does not meet your expectation for any reason, you can return the product without ifs and buts. To make it even more easy for you, we recommend to use the attached return form and the return stickers free of charge within 30 days of receipt. Just drop the parcel at your nearest GLS parcel shop or DHL branch (depending on the provided return label) in Germany. Of course this is not a compulsory requirement to exercise your right of withdrawal. Find more information on our website for your right of withdrawal.
